Company News
Latest updates of our factory, patents and overseas delivery projects
How ZRAY Custom Carton Erecting Machines Solved High Jam Rates for a Global E-commerce Hub
Case study | August 2026 A global e-commerce fulfillment hub in Central Europe was running 24/7 through peak…
Read More
Troubleshooting Checklist for Abnormal Servo Motor Noise on High-speed Carton Forming Machines
The Whine That Nobody Could Ignore The ZF-420D at a pharmaceutical carton plant in Hangzhou had been running…
Read More
Next-Gen Hot-Melt Case Former Introduced by ZRAY to Eliminate Bottom-Seal Failure in Heavy Freight
News release | August 2026 ZRAY has introduced a next-generation hot-melt case former built specifically to eliminate bottom-seal…
Read More
ZRAY Introduces Zero-Waste Tape Head Technology for Precision Pressure-Sensitive Case Sealing
News release | August 2026 ZRAY has introduced a zero-waste tape head for its pressure-sensitive case sealing systems…
Read More
ZRAY Releases Heavy-Duty Case Erector Specially Designed for Large Jumbo Corrugated Boxes
News release | August 2026 ZRAY has released a heavy-duty case erector engineered specifically for jumbo corrugated boxes…
Read More
ZRAY Partners with Sustainable Packaging Manufacturers to Optimize Case Former Flap Folding Alignment
News release | August 2026 ZRAY has signed partnership agreements with two corrugated packaging manufacturers to co-develop flap…
Read MoreIndustry Technical Blogs
Practical guides to help you select, operate and maintain carton forming machines
Multi-Size Case Erecting for Contract Packers: Sub-5-Minute Changeover Across 50+ SKUs
A contract packer lives or dies by the number of box sizes it can run in a single…
Read More
Flat Blank Magazine Feeders on Case Erectors: Loading Efficiency and Jam Prevention
The magazine is the least engineered part of a case erector and the one that stops the machine…
Read More
Bakery and Pastry Packaging: Choosing a Box Forming Machine for Paperboard and Corrugated
Bakery packaging sits between two machine categories and often gets specified as the wrong one. The product may…
Read More
Cold-Room Adhesive Jams in Frozen Food Packaging: Causes and Solutions Below Zero
Cold-room packaging fails differently from ambient packaging. The adhesive that bonds perfectly at 20 °C sets too fast…
Read More
Servo-Driven Mandrels in Case Erecting: Holding Flap Fold Angles Within Half a Degree
The mandrel is the component that decides whether an erected case is square, and the flap fold angle…
Read More
Hot-Melt Nozzle Adjustment on Case Erectors: Pressure, Distance and Temperature Settings
Hot-melt sealing fails far more often at the nozzle than at the tank. The adhesive is correct, the…
Read MoreSubscribe To Get Latest News & Technical Guides
Leave your business email to receive free industry articles and new product updates