Company News
Latest updates of our factory, patents and overseas delivery projects
ZRAY Smart Box Forming Machine with Remote Diagnostic Systems (Siemens PLC, 24h Support) | ZRAY
ZRAY now ships every box forming machine with a remote diagnostic system as standard, not as an upsell.…
Read More
ZRAY Launches Kraft Paper Burger Box Erecting Machine with High-Speed Output (Up to 40 CPM) | ZRAY
ZRAY has released a dedicated kraft paper burger box erecting machine for quick-service restaurants and food packaging converters.…
Read More
Vertical Carton Erecting and Forming Machine: Why ZRAY Is the Preferred Supplier (Up to 25 CPM) | ZRAY
For years the vertical-format carton erector was the budget option: cheaper, slower, and more prone to jamming than…
Read More
Energy-saving Running Optimization Schemes for Long-term Unattended Operation of Carton Forming Machines
The 37,000 RMB Electric Bill Nobody Questioned for Three Years During an energy audit at a logistics packaging…
Read More
Intelligent Control System Iterated to Lower the Failure Rate of Carton Forming Machine during Long-hour Operation
SHANGHAI, China, June 8, 2026 — Zray has completed a major iteration of its intelligent control system firmware…
Read More
ZRAY Entry Level Automatic Carton Erecting Machine Pricing & Feature Guide (Up to 15 CPM) | ZRAY
Entry level does not mean stripped down. It means the machine is sized for plants that run 1,000–5,000…
Read MoreIndustry Technical Blogs
Practical guides to help you select, operate and maintain carton forming machines
Multi-Size Case Erecting for Contract Packers: Sub-5-Minute Changeover Across 50+ SKUs
A contract packer lives or dies by the number of box sizes it can run in a single…
Read More
Flat Blank Magazine Feeders on Case Erectors: Loading Efficiency and Jam Prevention
The magazine is the least engineered part of a case erector and the one that stops the machine…
Read More
Bakery and Pastry Packaging: Choosing a Box Forming Machine for Paperboard and Corrugated
Bakery packaging sits between two machine categories and often gets specified as the wrong one. The product may…
Read More
Cold-Room Adhesive Jams in Frozen Food Packaging: Causes and Solutions Below Zero
Cold-room packaging fails differently from ambient packaging. The adhesive that bonds perfectly at 20 °C sets too fast…
Read More
Servo-Driven Mandrels in Case Erecting: Holding Flap Fold Angles Within Half a Degree
The mandrel is the component that decides whether an erected case is square, and the flap fold angle…
Read More
Hot-Melt Nozzle Adjustment on Case Erectors: Pressure, Distance and Temperature Settings
Hot-melt sealing fails far more often at the nozzle than at the tank. The adhesive is correct, the…
Read MoreSubscribe To Get Latest News & Technical Guides
Leave your business email to receive free industry articles and new product updates