Company News
Latest updates of our factory, patents and overseas delivery projects
Essential Daily Maintenance Checklist for Corrugated Box Erectors
A corrugated box erector runs thousands of cycles a day, and the machines that last are the ones…
Read More
How to Calculate the ROI of an Automatic Carton Erecting Machine
How to Calculate the ROI of an Automatic Carton Erecting Machine A carton erector is not really an…
Read More
ZRAY Drives Green Packaging Transition with Glue-Saving Stitch Patterns on Hot-Melt Case Formers
News release | August 2026 ZRAY has introduced glue-saving stitch patterns for its hot-melt case former range —…
Read More
How to Prevent Tape Misplacement on Automatic Case Erecting Lines
A strip of tape applied a few millimeters off-center is more than a cosmetic flaw. Misplaced tape leaves…
Read More
Custom Carton Erectors for Irregular and Extra-Large Corrugated Boxes
Standard carton erectors are built for standard boxes — a defined size range, regular proportions, and predictable folding.…
Read More
Three-piece Carton Forming Machines Put into Mass Production for Kazakhstan Food Packaging Factory
ALMATY, Kazakhstan, July 28, 2026 — Zray has successfully delivered and commissioned six ZCF-T series three-piece carton forming…
Read MoreIndustry Technical Blogs
Practical guides to help you select, operate and maintain carton forming machines
Multi-Size Case Erecting for Contract Packers: Sub-5-Minute Changeover Across 50+ SKUs
A contract packer lives or dies by the number of box sizes it can run in a single…
Read More
Flat Blank Magazine Feeders on Case Erectors: Loading Efficiency and Jam Prevention
The magazine is the least engineered part of a case erector and the one that stops the machine…
Read More
Bakery and Pastry Packaging: Choosing a Box Forming Machine for Paperboard and Corrugated
Bakery packaging sits between two machine categories and often gets specified as the wrong one. The product may…
Read More
Cold-Room Adhesive Jams in Frozen Food Packaging: Causes and Solutions Below Zero
Cold-room packaging fails differently from ambient packaging. The adhesive that bonds perfectly at 20 °C sets too fast…
Read More
Servo-Driven Mandrels in Case Erecting: Holding Flap Fold Angles Within Half a Degree
The mandrel is the component that decides whether an erected case is square, and the flap fold angle…
Read More
Hot-Melt Nozzle Adjustment on Case Erectors: Pressure, Distance and Temperature Settings
Hot-melt sealing fails far more often at the nozzle than at the tank. The adhesive is correct, the…
Read MoreSubscribe To Get Latest News & Technical Guides
Leave your business email to receive free industry articles and new product updates